Our machine is specifically built just for flattening large slabs. It has a helical planner head and a drum sander built into one machine. This allows us to plan and sand your slabs. This will do solid wood and epoxy river tables with no problems. We can process slabs up to 74" wide and 20' long.
Our cost for surfacing is $100 per hour with a one our minimum charge. Most 8' tables we can surface both sides in one hour.
We typically can process a single slab at the time you drop it off. If you need bulk amount slabs done it's typically 1-2 lead time.
Not necessarily but highly recommended. The wood must be bellow 12% moisture content for the planner to cut properly. If you need kiln drying we do offer that service.
We can process lumber up to 24" wide. Our machine removes saw marks and cups out of lumber.
Our cost for planning is $100 per hour with a $50 minimum.
We typically can process a couple of boards at the time you drop it off. If you need bulk amount of lumber done it's typically 1-2 lead time.
Not necessarily but highly recommended. The wood must be bellow 12% moisture content for the planner to cut properly. If you need kiln drying we do offer that service click here.
