

Hammer Beam Truss
Freight is quoted per order, never guessed: add this timber to your quote list below and we will price delivery for the exact size and length. Louisville pickup can be noted in the quote form.
The hammer beam is the showpiece truss. Instead of one long tie beam crossing the room, short hammer beams project from the walls and carry the frame on brackets and posts — leaving the center completely open. It's the design from old English halls and cathedrals, and nothing else opens a room up like it.
A design this open lives or dies on its joinery, and ours is the real thing: true mortise-and-tenon joints, cut and fitted by hand — no metal brackets, no bolts. This is how hammer beams have been built for hundreds of years, and it's our bread and butter.
We build them in Louisville from Douglas fir timbers we sawmill ourselves. Timbers start at 8 inches wide, with beam height sized to the span, and you choose span and pitch — 4/12 up to 12/12. Wider spans than the picker shows are possible; they just need engineering, which we can talk through.
Hammer beams belong in great rooms, lodges, churches, and event barns — big spaces where the frame is the architecture.
Hand-cut mortise-and-tenon joinery on our trusses · Freight quoted per order — never guessed · Built to order in Louisville, Nebraska
Timbers are cut to order on our band mill in Louisville, then kiln dried to 20% moisture or less. Add the size and length you need to your quote list and we will confirm the lead time and freight for your order — freight is quoted per order, never guessed. Louisville pickup can be noted in the quote form; we will confirm your pickup time once the timber is ready.
Our trusses are built with hand-cut mortise-and-tenon joinery — no metal plates. Timber frame homes, great rooms, pergolas and pavilions are cut on our band mill in Louisville from Douglas fir, sawn full dimension and kiln dried to 20% moisture or less. Working from a cut list, or need a size you don't see? Send it over — cutting full house packages and odd sizes is most of what the mill does.

Common questions
The questions we hear most about timbers and trusses — sizing, finish, timing, and custom work.
Yes. We saw full dimension — an 8×8 measures a true 8×8. We hold our cuts to a quarter inch or better, usually an eighth.
Rough-sawn, with the mill marks you can see and feel — the look most people want for timber frames, pergolas, and porch work. If a project needs surfaced pieces, ask us.
A few timbers run about 2 weeks. Large orders and full house packages run 4–6 weeks, and trusses and custom timber work run 4–8 weeks. We confirm your lead time with your quote.
Treated is limited and case-by-case. Ask us about your project rather than ordering blind — we'll tell you straight whether we can cover it.
Send your cut list. Cutting odd sizes and full house packages is most of what the mill does.
Why Rustic
Cut on our own mill
Every timber starts as a Douglas fir log on our band mill in Louisville — we don't buy beams off a rack and resell them.
Hand-cut joinery
Our trusses are built with true hand-cut mortise-and-tenon joinery — no metal plates as the standard. The way trusses have been built for thousands of years.
Real people, straight answers
Working from plans or a napkin sketch? You talk to the people who cut the wood. Call (402) 980-3612 or use the contact form.
Working from a cut list?
Send it over — we'll price the whole package, confirm the lead time, and quote freight in one go.
