Vacuum Kiln Drying

Price
$1.25
Thickness Category:Dimensional 1"
In stock! Usually ships within 24 hours.

Our kiln gives you the quickest, highest quality drying available. We can dry up to 4000bf of 1" dimensional lumber and around 2000bf of slabs 60" wide and 16' long. Dry times are approximately one week per inch of thickness. Dry schedule all depends on how thick the wood is, the species and current moisture content.

  • Cost of service priced by the board foot - Dimensional lumber up to 5/4" $1bf, 10/4" $2bf, 14/4" $3bf. Live edge slabs have additional $.75bf charge.
  • Lead time is 4-8 weeks until it can be loaded into the kiln. Dry time is 2-6 weeks depending on the thickness and moisture content
  • Wood must be air dried below 28% 
  • Full kiln load discount is a flat rate of $1,000 per week. Requires the lumber to be pre-stacked with stickers and ready to load
  • Largest bundle stack sizes is 60" wide x 54" tall x 16' long
Shipping Information

You can set up shipping for all of our slabs through the check out process. We have set rates for different sizes of slabs.

When slabs are shipped with LTL carrier, shipping cost is the same whether you buy one or a whole pallet. Save money the more you buy.

If you have any troubles setting up shipping, please send a message through our "Chat with us" option to recieve help.

Products that receive free shipping will be listed in the description and is autmatic in the shopping cart

Our on-line store is open 24/7 and we ship Monday through Friday, excluding some holidays. Orders received for products without shipping restrictions on its product page will ship 1-2 business days.

Slab Finishing Services

Have you slab built into a finished product by our skilled craftsmen. Following is the steps we take to build each slab project.

1. Surface plane the slabs to assure they're perfectlly flat.

2. Remove and bark and debris from all of the edges and micro cracks.

3. Stabilize all of the cracks and voids. We use several different methods and products, but mostly use epoxy products. All the voids, cracks and deteriorated wood will be completely stabilzed to assure a solid slab.

4. Final sand all of the sides of the wood up to 180-320 grit. Depending on the species and what finish being used will determind how high we sand up to.

5. Finish application. We use two different finishes. We apply two coats of our Rustic Lumber Furniture oil. After it cures we then apply ceramic coating. Our other finish option is spraying three coats of urethane finish.

6. Mount the base. We install the base with threaded inserts. This allows easy removal of the base from the slab.

1 review

Customer Reviews

Based on 1 review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
100%
(1)
N
Nick Beltzer

I wouldn't go back. Had 1 log for 7 months. Lost it, found it lost it. Tried to give me some other log. Way longer than expected. Veneer quality lumber turned into junk. Cracks and cupping. For $1200 its a joke. The only people that know what they're doing is the lady up front ( Brandy ) and a guy in the back ( Phil )

don't forget your finish

Pick from our line-up of durable furniture oil in different colors, or our food safe oil.
Rustic Lumber Furniture Oil
Rustic Lumber Furniture Oil
36
Rustic Lumber Furniture Oil
Price
$60$160
Hydrocoat Ceramic coating
Hydrocoat Ceramic coating
3
Hydrocoat Ceramic coating
Price
$120
Rustic Lumber Exterior UV Oil
Rustic Lumber Exterior UV Oil
Rustic Lumber Exterior UV Oil
Price
$50

Epoxy for the pros

Build your projects with professional quality epoxy products.
10% off
Rustic Lumber Epoxy Deep Pour
Rustic Lumber Epoxy Deep Pour
4
Rustic Lumber Epoxy Deep Pour
Sale price
$225
List price
$250
10% off
Sold out
Rustic Lumber Epoxy Thin Coat
Rustic Lumber Epoxy Thin Coat
8
Rustic Lumber Epoxy Thin Coat
Sale price
$76.50
List price
$85

You may also like